Equipment technical parameters

Weight: about 100Kg

Working voltage: 220V 50Hz.

Labeling speed: about 10-25 sheets / min

Labeling accuracy: ± 1mm (excluding product and label error)

Applicable product range: 30 ~ 200mm wide, 30 ~ 300mm long

Applicable label range: 10 ~ 150mm long, 10 ~ 100mm wide (need to provide the actual label size assessment)

Maximum label supply: diameter 280mm, paper roll inner diameter 76mm

Self-adhesive label parameters: (or carton parameters, film parameters, carton parameters)

Roll label in the labeling machine work the entire process, including label delivery, positioning, out of the label, applied and backing paper rewinding, to successfully complete the labeling process, the overall label has the following requirements.

Label spacing: 3-4mm ± 0.2mm, the upper and lower edge of the label and the bottom of the backing paper spacing: 2mm

Surface material: basic grammage 78 g/m2 plus or minus 10% Thickness: 0.064mm plus or minus 10%

Backing paper: Basic weight 61g/m2 plus or minus 10% Thickness: 0.055mm plus or minus 10%

Consistent release force, uniform thickness, a certain tensile strength, translucent Grassian base paper is generally between 60-80 g, fiber density tightness flatness to be good, not easy to break when labeling, the overall translucency to be consistent, the sensor correctly identify the location of the label.

Tensile force: machine direction: 16kg/25mm

Horizontal direction: 7kg/25mm

Tear resistance: machine direction: 25g / sheet

Crosswise: 31g/sheet

Before labeling to eliminate the static electricity in the roll label, so that the label is firm out of the label, from the backing paper, because static electricity will cause labeling when not out of the label or the labeling inaccuracy phenomenon, die-cutting to avoid cutting through the backing paper and not out of the label and torn backing paper phenomenon.